Application Instructions - Multi-Trans
Click Here to order these transfers directly from us directly to save money :)
For Hard Surfaces
- Set the temperature of the transfer press to 200°C / 390°F.
- Place the substrate on the lower plate.
- Place the transfer paper on the substrate and cover both with the a silicone pad with 5mm thickness.
- Place the sensor of the digital thermometer between the transfer paper and the substrate. (Relevant is the temperature on the surface of the substrate which is shown through the digital thermometer. The printing time depends on the size (mass) of the substrate.)
- Open the transfer press when the below mentioned temperature is achieved and peel off the transfer paper as indicated below.
- ATTENTION: At this point, the material is very hot. Take precautions when moving it.
For Mugs
- Preheat your mug press before use.
- Position & fix the printed image to the mug using a heat resistant tape.
- Put the mug in the press.
- Press by using the settings below.
- IMPORTANT: The timer of the mug press should not start until the mug has reached the set temperature. If your press does not do this automatically, increase the press time to 4 minutes!
- Cool the mug down by dipping into cold water. Make sure the transfer media is soft before peeling.
- ATTENTION: At this point, the mug is very hot. Take precautions when moving the mug.
Let customers speak for us
thank you very much :)
thank you very much :)
thank you very much :)
thank you very much :)
thank you very much :)
thank you very much :)
thank you very much :)
Great product and print quality!
I dont often leave reviews but my order just came through the post box and I cant believe the quality. This is without doubt a first class service at a great price! Thank you so much, I will be back for more!
Jake
Custom Waterslide Decals - Full Colour Digital Laser Printed Transfers - Ready-To-Apply
Superb, will order again soon!
I had an unusual request for some waterslide labels for a pre-war car fuel pump. (SU Petrolift)
Having been able to create a basic image myself, Phill patiently refined the image and it's dimensions to accurately recreate a convincing facsimile of the original label.
The job of getting it right took a lot of communication over several detailed messages, and I am extremely pleased with the result.
Although I have not yet had the chance to apply the decals, I'm more than confident that all will be well.
Many thanks Phill for your patience and help in getting this small detail on an old car right, and for the blisteringly quick arrival in the post!
Top Job
Excellent service! Will definitely buy from again.
Came out brilliant and easy to apply!
